Skip to main content

How to Set Up an RGB LED Strip with a Controller

Learn how to install and power a Vivalyte RGB strip using a DMX or RF controller.

🔧 You’ll Need:​

  • RGB LED strip
  • Controller (DMX or RF)
  • PSU (12V / 24V)
  • Control signal cable (DMX/0–10V)
  • Screwdriver or connector blocks

📝 Steps:​

  1. Connect RGB strip to controller output:

    • R → Red
    • G → Green
    • B → Blue
    • V+ → Shared voltage line

  2. Connect controller input to PSU:

    • V+ and V– in from power supply

  3. Connect control signal (DMX, RF, DALI):

    • DMX: Data+, Data–
    • 0–10V: DIM+, DIM–

  4. Address controller (DMX) or sync remote.

  5. Power up and test.

🧠 Tips:​

  • Use aluminum profiles for heat management.
  • Terminate DMX line if it’s the last device.